288 Users Online
Revision: 20140222_034131 | All Revisions
The Heckler & Koch MP5 is an iconic submachine gun in the entertainment world. Almost everyone have seen it once in a movie. And it's natural choice for someone who is getting into airsoft. But it's disassembly is not the easiest compared to an airsoft M4. In this article, we show you how to disassemble the various parts of an airsoft MP5.
The MP5 shoulder stock is the easiest component to remove on the gun. In fact, it's easier to remove than a M4 shoulder stock. There are various types of MP5 shoulder stocks. But the removal process are the same. In this article, we show you how to remove a collapsible shoulder stock, which is the hardest MP5 shoulder stock to remove. Therefore, you will be able to apply this procedure to any MP5 shoulder stock.
The photo above shows the MP5 collapsible shoulder stock. The only thing holding it onto the receiver is a pin. The pin is held in place by the flat-screw next to the sling mount. After you unscrew it, you can tap the pin (see photo below) out.
Next, pull the shoulder stock straight back to separate it from the MP5 receiver (see photo below). This is about as far as you have to go on any other MP5 shoulder stock. There are a few more steps for the collapsible version.
The collapsible shoulder stock guide(s) are held onto the receiver by a lock. You have to raise the guides slightly to clear the lock as you slide it out completely. The photo below shows the guide lock.
The following photo shows the guide lock components. The shinning metal component acts as a spring. The black plastic component is the lock.
The JG M5-S6 comes with an integrate mock silencer similar to the real steel H&K MP5SD3. In order to disassemble the rest of the gun, the mock silencer have to be removed. However, it is glued on. Therefore, the only way to remove it is to use a vise grip on it. The photo below shows the damage that will be done to the mock silencer when it is removed in this manner.
Twist it a quarter turn counter-clockwise and the mock silencer can be removed. The photo below shows the front iron sight and the inner barrel after the mock silencer is removed.
As you can see the inner barrel does not extend the full length of the mock silencer. It's another reason why you'd want to disassembly this gun; to put in a longer inner barrel.
- Amazon User Reviews
- Amazon User Reviews
- Amazon User Reviews
Fun for Photographers
Get Our
Memecoins!
