Oct 19, 2013 · Excerpt: The o-ring for an airsoft electronic gun (AEG) cylinder head is the same as the AEG piston head. It is #14, which is 15/16 In. OD x 3/4 ...

Nov 13, 2013 · - Inside the Gearbox: The biggest culprit is generally piston o-ring. That o-ring wears with every round fired. It needs to be replace more ...

I have determined that the method documented in this article is a bad idea. See the "Aftermath" section below for details. The better solutions are the Bravo ...

Now it's time to seal the AEG piston head to the cylinder. Put a finger over the air nozzle. Push the piston into the cylinder. As soon as it has passed the ...

O-Ring for AEG Piston Head The piston head oring it not #14 size , 15/16 o-ring measure 23.813 mm the correct o-ring size for mariu compatible cylinder head ...

To remove the front iron sight, unscrew the elevation adjustment screw using an elevation adjustment tool or a pair of pliers. I used the latter. You will loose ...

If your AEG airsoft gun suddenly stops working, it could mean several things: Battery is dead. Motor is burnt. Wires are bad. Gearbox is locked. This ...

By default, the Burst Wizard King Kong Elite will cycle once and pull the piston back halfway. That's halfway too far from the piston resting position. The ...

I finally took apart my Echo1 Red Star IGOR last night to upgrade it. It has a version 3 gearbox, but the cylinder head is not version 3. I have attached the ...