245 Users Online
Revision: 20140516_033056 | All Revisions
The VSS Vintorez is a mysterious, suppressed full-automatic sniper rifle from Soviet, which is issued primarily to Spetsnaz units for undercover or clandestine operations. It is only recently discovered by the other nations through recent wars. Therefore, VSS has only now begun to show up in the entertainment industry, such as movies, video games, and airsoft.
Trivia
VSS stands for Vintovka Snayperskaya Spetsialnaya or "Special Sniper Rifle".
That's right, there has never been an airsoft replica of the VSS Vintorez in the past. Commercially, anyway. And Echo1 has now produced the first commercial airsoft replica. In this article, we will be experimenting with the Echo1 Red Star IGOR VSS Vintorez airsoft sniper rifle.
Brands
AY VSS Vintorez AEG has just been released in the United States. From the photos and the specs, the AY Vintorez is identical to the Echo1 Red Star IGOR.
The Echo1 Red Star IGOR comes in a cardboard package. It has a nice faded designed of the Echo1 logo on an American flag (see photo below). Echo1 identifies the model number of the Red Star IGOR faux wood version on the box as JP-97. The black plastic shoulder stock version is model number JP-81MB. Other than that, there is nothing particularly special about the outside.
Inside, you'll find the content well padded. It's a box that you'll want to reuse to store your gun. If you plan to use the iron sight, you can even use the padded box as a gun bag.
The box content includes the VSS Vintorez rifle, two high-capacity magazines, a 9.6v NiMH stick battery, a battery charger, and a warranty registration card. Strangely, the user manual is not included. Good thing that the user manual is available as a PDF on Echo1's web site.
The foam should really be reversed so that the Echo1 Red Star IGOR points to the right side, rather than the left side. That is because it's huge charging handle sticks out so awkwardly (details later in the article). When laid out in the manner shown in the photo above, the charging handle actually poke out of the box, scratching anything underneath (like the hood of a car). The problem is practically solve by flipping the foam around so that the charging handle is facing upward.
There is a yellow warning label: "Must USE High Grde BBs ONLY! Failure to do so WILL VOID WARRANTY. Ask Your authorized Echo Dealer."
If you've been a fan of the Russian SVD, you might consider taking a closer look at the VSS Vintorez. And if you are not a fan of the SVD, you might consider taking a look at the VSS Vintorez as well. For the SVD fans and haters, the VSS Vintorez is 300 millimeter shorter than the SVD, making it much more manageable for a sniper. It is about the same size as an assault rifle. And with its full automatic firing capability, you can use it as such.
The photo below shows the Echo1 Red Star IGOR, an airsoft VSS Vintorez replica. It looks very compact and very slick. If you are already a AK fan, then I'm sure you'll easily fall in love with the VSS. On the other hand, if you are not a AK fan, you might fall in love with its slickness and its innovation (as I have).
The version we got has a fake wood shoulder stock (see photo below). It is more authenticate than the black plastic shoulder stock. There is a sling mount at the end of the shoulder stock. It is too far rear for a single point sling, unless you make the sling really short. It's intent is for a two point sling so that you can shoulder the sniper rifle on long trips. A sturdy rubber pad provide comfort to your shoulder, while provide enough support for recoil.
The second sling point is in front of the receiver, just behind the barrel (see photo below). This sling point is too far forward and too small for a single point sling attachment. It looks like if you want to use this sniper rifle as an assault rifle, you'll have to customize the gun for a single point sling.
The left side of the receiver is very similar to a AK47 (see photo below). It has a side rail mount for you to attach a Picatinny weaver rail for accessories. "ECHO1 IGOR" is stamped onto the left side of the receiver.
The right side of the receiver is also similar to the AK47 (see photo below). And that differs from the real VSS Vintorez. Whereas the VSS Vintorez has the selector switch behind the trigger to enhance the sniper prone position, the Echo1 Red Star IGOR has the standard AK47 selector switch on the side of the receiver.
Cross-Reference
How does the Echo1 Red Star IGOR compare to the real VSS Vintorez? Take a look in our "VSS Vintorez Comparisons" article.
Very different from the western counterpart, but standard on the AK's, the Echo1 Red Star IGOR's selector switch is safe when in the upper most position, full-auto firing in the center position, and semi-auto in the bottom most position. The switch is also very tight. Extending the index finger to move it has very little effect. I hope the firing selector switch will loosen over time with use.
The VSS Vintorez is rather uniform and flat on both sides. However, the charging handle is big, sticking out perpendicularly to the gun (see photo below), making it a bit awkward to lay down on its right side (if you are left handed). But that's not a fault of the Echo1 Red Star IGOR, because the Echo1 version is a replica of the real VSS Vintorez.
There is a "OFFICIAL ECHO1 LICENSED PRODUCT" sticker on both side of the receiver. However, it is unclear which licensed product it is referring to. That is because of the unfamiliarity with Russia's brand and manufacturer process. For example, what is "Red Star" referring to? Or "IGOR"? Why is "VSS" and "Vintorez" not in the official name of this product?
The front iron sight has elevation adjustment (similar to the M4 front iron sight). You need a special tool to change the settings. But you can substitute with a tweezer.
The rear iron sight has range marking (see photo below). It's not real clear how the range applies to airsoft. But if you can make it work for you, then you're ahead of the class.
The rear iron sight also can be adjusted for elevation. No special tool is required. You just push the button and move the cylinder forward to raise the rear iron sight (see photo below).
Neither the front nor the rear iron sight allows for windage adjustment. Both iron sights are attached permanently to the mock silencer barrel as there are no visible removal method.
When you place this airsoft weapon on safe, you can pull the charging handle back and it will be held in place. When the weapon is in semi-auto and full-auto firing mode, you can still pull the charging handle back, but it won't stay in place. You'll find the hop-up unit underneath the charging handle cover. Brand new, when here is no hop, the gun seems to fire at a straight line out to at least 60 feet.
At the back of the receiver, there is a dust cover release button (see photo below). Pressing the button unlocks the top dust cover from the receiver.
Photo below shows the top dust cover removed. You can see the hop-up unit in front of the gearbox. The gear box has a ported cylinder. Strangely, wiring seems to be going from the front of the gearbox to the rear shoulder stock. It is unclear why Echo1 doesn't wire it from the back of the gearbox.
Cross-Reference
Are you interested in the complete disassembly of the Echo1 Red Star IGOR? Take a look in our "Complete Tear Down of the Echo1 Red Star IGOR VSS Vintorez" article.
The hop-up unit works as a slider. Slide it all the way to the right for no hop-up. Slide it all the way to the left for full hop-up. It seems too easy to slide, with virtually no resistance, making me wonder if the hop-up would actually stay in place with actual use. But I have no chance to try it yet, because the Echo1 Red Star IGOR sniper rifle seem to shoot perfectly straight with zero hop-up at the moment.
The package includes two high capacity magazines. Each magazine holds 150 rounds. They are made out of polymer and are quite light. The construction is quite study and robust. At first glance, I have thought it might be full metal. Even after picking it up, I have wondered if it is full metal or not. The texture is matte and has a metal feel. It's only after careful examination that I have concluded that it is plastic, much like the real steel VSS Vintorez magazine.
Typical of high-capacity magazines, there is a winding wheel at the bottom of the magazine (see photo above). It is, however, slightly indented. Because of this indention, it is not as easy to rotate the winding wheel as other high-capacity magazines (M4 and MP5) I have tried. It's easier if you use your finger tip.
The top of the magazine is typical of a high capacity magazine. Photo below demonstrates the hatch, for loading BB's, opened and closed position. There is a BB unloading switch, making it easy to unload left over BB's.
Inserting the magazine into the Echo1 Red Star IGOR is not the easiest thing in the world. If you are new to the mag and the gun, then you'll likely insert it wrong and it will pull out easily. The correct way is to inside the front end and hook it into the receiver. Then rotate the magazine back and upward until it clicks into place. Tuck on it to make sure it is locked in. If it pulls out, then you have not inserted it correctly. With some practice it will be no problem.
At this time, the Echo1 Red Star Igor has been released without any mid-cap or low-cap magazines. Echo1 claims that mid-cap mags are in the works.
Cross-Reference
Stay up-to-date on the mid-cap release for the Echo1 Red Star IGOR: "Mid-Cap Magazine for the Echo1 Red Star IGOR VSS Vintorez?".
In the mean time, the only way to practice real cap MilSim is to load multiple high capacity to real capacity and swap between the mags. I have tried winding up the high capacity magazines and have been able to fire off 46 rounds without winding. Therefore it is possible to figure out how many rounds to load, before hand, to simulate 10 rounds, 20 rounds, or 30 rounds. You can then load them that way and wind them up in the staging area before entering the field.
Echo1 doesn't skimp on the battery, giving you a 9.6v NiMH stick battery right off the bat. Other manufacturers either provides a more sluggish 8.4v NiMH battery or doesn't provide one at all. The extra 1.2 volts of juice should give your Echo1 Red Star IGOR a slightly faster firing rate.
The charger, on the other hand, is a typical slow charger that is provide with basic airsoft electronic gun (AEG) packages. Since I have a SmartCharger, I haven't tried this wall charger at all.
The AC wall charger is made for the U.S. market accepting 110v AC at 60Hz. It outputs 9.6v at 450mA. The stick battery has 1200mAh capacity. Internally, it has eight 1.2v 2/3A NiMH battery cells that composes 9.6v.
The battery compartment is in the shoulder stock. In order to gain access, you have to use a Phillips screwdriver to unscrew two screws at the shoulder pad. After removing the shoulder pad, you insert the stick battery in the lower compartment. The upper compartment houses the fuse and wiring.
Out of the box, the Echo1 Red Star IGOR VSS Vintorez shot BB's all over the place. That's a bit shocking for a supposedly sniper rifle replica. After taking a look at the hop-up and bucking, we found that the bucking was super-oiled. Also, the hop-up nub was just a tiny rubber tube. We used rubbing alcohol to dry out the bucking inside. Then after breaking the gun in, it shot consistently to one spot at 360 FPS. FPS was a little too low for a sniper, so it's definitely worth upgrading.
Echo1 provides a brass tightbore 6.04mm inner barrel that is 428mm long. It actually doesn't reach the front of the mock silencer. Therefore, it is a candidate for upgrade. A stainless steel 6.01mm inner barrel that is 470mm long will probably bring the Echo1 Red Star IGOR up to sniper specs.
Custom Parts: air nozzle cylinder head tappet plate
- Amazon User Reviews
- Amazon User Reviews
Fun for Photographers
Get Our
Memecoins!
