Disassemble all of the pieces from the ambidextrous part. But don't remove the hinge pin. Insert the latch on the left side of the M4.

My friend has the A&K Masada DMR. It's got the ambidextrous magazine release latch. It's much improved over the standard M4 magazine release latch. But it also ...

Replacing M4 Magazine Catch with an Ambidextrous Version ... Did your message disappear? Read the Forums FAQ. Add Comment. Spam Control | * indicates required ...

The photo below shows the proper way to remove the magazine from this airsoft magazine adapter. Insert your index finger in between the magazine release paddle ...

Insert your thumb in between the magazine release paddle and the magazine. Then pull the magazine downward to remove. WARNING Do not remove the AK Adapter for ...

Insert your index finger in between the magazine release paddle and the magazine. Then pull the magazine downward to remove. WARNING Do not remove the VSS to ...

This instruction uses the white version so that ... magazine into this airsoft magazine adapter. </p> ... magazine from this airsoft magazine adapter. </p> ...

To disassemble the MP5 airsoft high-cap magazine, you have to tap out the pin at the top of the magazine (see photo below). To tap it out, you'll need a punch ...

The Airsoft3D VSS to MP3 Magazine Adapter is a 3D printed part that allows you to use MP7 AEG magazines in the Echo1 Red Star IGOR. This is the third time we've ...