Jul 9, 2017 · They have started jamming a little more and more over time. Last month, they have jammed all time time. And this week, I have found that they ...
To disassemble the MP5 airsoft high-cap magazine, you have to tap out the pin at the top of the magazine (see photo below). To tap it out, you'll need a punch ...
Excerpt: It's quite common to have jammed airsoft magazines. Especially my M4 magazines that stack BB's side-by-side until they get to the feeding hole. Out of ...
The notched hole is used by the hop-up component to provide a spin and changes the speed of the pellet. The side notches are intended to keep the barrel in ...
Use a flat head screwdriver to unscrew the pin. Then use a punch or hex wrench to push the pin out.
Aug 31, 2022 · First and foremost, disassemble your AEG completely and clean all visible dirt and grime with a microfiber cloth. Once you have cleaned all the ...
People also search for
Oct 9, 2013 · Think about it. Feed BB's into the high cap magazine using a speedloader. Then insert the magazine into the airsoft gun and fire away. That ...
It's possible that your motor pinion gear has jammed in the gearbox. By removing the motor, you could have reset the lockup already. Try putting the motor and ...
First thing to do is to remove the motor from the handgrip and see if the battery, motor, and wires are good. After pulling the motor out, the motor tuns with ...
Airsoft Guns That Use the M4 Magazine · APS Urban Assault Rifle (UAR) · FN Herstal F2000 Assault Rifle · FN Herstal Fabrique Nationale Carabine (FNC) · FN Herstal ...