Aug 31, 2022 · First and foremost, disassemble your AEG completely and clean all visible dirt and grime with a microfiber cloth. Once you have cleaned all the ...

Use your right thumb on the forward assist button. The receiver should separate with some pressure. Comments & Discussion >>. Removing the Handgrip. On a ...

In order to disassemble the rest of the gun, the mock silencer have to be removed. However, it is glued on. Therefore, the only way to remove it is to use a ...

Sep 27, 2013 · First thing I did was to remove the inner barrel for cleaning. I wrapped a small strip of toilet paper on the cleaning rod, dipped it in rubbing ...

The lowest gear, out of the three, is accessible from outside the gun to let you adjust the spin/velocity. When you adjust the gears, it changes the amount of ...

Jul 20, 2013 · First thing you need to do is to get the metal gearbox out of your gun. There are many instructions out there for the various gun, so I won't go ...

Sep 23, 2014 · Real Gun Muzzle Devices on Airsoft Rifles. There are a lot of airsoft flash suppressors and mock silencers. There are also a lot of real gun ...

Then push the quad forward and remove it (see photo below). From this point forward, the reset of the disassembly process applies to all airsoft AUG AEG's.

Possibly. One drawback is that you can only let dirt and oil build up in your inner barrel before the BB's jam in the gun. So at some point you will have to ...

To remove the orange tip, you'll need to first remove the front iron sight (see previous section). Next, you'll have to punch out the tiny dowel that is at the ...