Possibility 1: The battery is low on power. The clicking noise means the battery is turning the motor; as the motor turns, the pinion gear on the motor hits ...

First thing to do is to remove the motor from the handgrip and see if the battery, motor, and wires are good. After pulling the motor out, the motor tuns with ...

Motor powers the gearbox and makes your airsoft gun fire. Two connectors on the back side of the motor connect the positive (red) and negative (black) wires ...

Resetting a Locked Version 2 Gearbox. If your AEG airsoft gun suddenly stops working, it could mean several things: Battery is dead. Motor is burnt.

That is because the safety pin no longer prevents the contact switch from snapping backward. This is actually a very reliable side-effect.

Jul 20, 2013 · First thing you need to do is to get the metal gearbox out of your gun. There are many instructions out there for the various gun, so I won't go ...

I attempted to fire a HPEG and a LPEG. ... Motorized devices, such as an airsoft gun, R/C ... I found it interesting that your setup wouldn't fire.

Just make sure the 90 degree adapter clears the gun. Some 90 degree Picatinny rail adapters allows you to screw addition rails to the top. That gives you ...

It does nothing on an airsoft gun (at least on most airsoft guns; some realistic training airsoft rifle make use of it). Hold the handgrip with your right ...

May 27, 2014 · Using the heavier BB causes the BB to curve down slightly. A slight upward hop-up adjustment made it shoot straight onto the red dot. Jake Tue, ...