CO2 Cartridge Hisses in SP2022 Magazine

Add Comment | Related Links | TrackBack
Related Content

CO2 Cartridge Hisses in SP2022 Magazine

I just got a Sig Sauer SP2022 airsoft pistol that uses CO2 cartridge. But when I screw it in, it hisses a lot. I screw it in really tight and the screw cap pops (plastic magazine), leaking the entire cartridge. By the third CO2 canister, I have figured out the tightest I can screw in before popping the screw cap. But even then, the gas is hissing out.

I can fire the gun and I have shot over 50 rounds all the while the magazine is hissing away. After a while, I think it's on the order of 1 or 2 hours, the CO2 canister would leak to depletion.

This is the first time I have a CO2 airsoft gun. I'm guessing the continuous hissing is not normal, right? I have a green gas P226 and it doesn't exhibit this kind of problem. Is the CO2 magazine suppose to leak? Or is this a defective magazine?

Jake
Sat, 22 Mar 2014 03:46:05 +0300

Ok. I solved the problem. I removed the CO2 cartridge valve (see photo below) inside the magazine. Its thread was reversed. So to unscrew it, I had to rotate it clockwise with a long flat head screwdriver.

The valve has a red o-ring (see photo below). I lubricated the o-ring with silicone oil. Then I screwed it back.

That didn't really fix the seal. But that did ensure that it won't be leaking at the o-ring.

Next, I used the Teflon tape around the CO2 canister neck (see photo below).

That improved the seal, but it still leaked. However, two layers of Teflon tape seemed to do the trick. There were just a tiny amount of leak. It was sufficient for the CO2 cartridge to last the night. I suspect three layers will be even better.

Jake
Fri, 28 Mar 2014 11:48:58 +0300

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Your Name: *
E-mail:
	Remember Me!
Comment: *
	File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File: (20 MB Max)
Spam Protection: *	Answer of 7 + 5?
	Click button only once, please!