V2 Gearbox Spring Guide and Shoulder Stock Screw Specification

Add Comment | Related Links | TrackBack
Related Content

V2 Gearbox Spring Guide and Shoulder Stock Screw Specification

Playing around with my spare M4 shoulder stock, I decided to try fitting it onto my JG MP5. But the screw for it was too short for the MP5 receiver. So I went to Lowes to find a 4" version.

Turned out that the screw was M5-0.8x50mm. It was practically impossible to find. And I needed something like 75mm to 100mm.

Back to the drawing board.

Jake
Wed, 25 Feb 2015 08:17:06 +0300

Went to Home Depot for a different errand today. Get a bolt for my APS ASR106 Mini Patriot M4. The bolt spec is M5-0.8x40mm.

Attached Image:

APS ASR106 Mini Patriot M4.jpg

Jake
Fri, 30 Dec 2016 04:49:14 +0300

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Your Name: *
E-mail:
	Remember Me!
Comment: *
	File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File: (20 MB Max)
Spam Protection: *	Answer of 0 + 1?
	Click button only once, please!