Tips on Changing the Inner Barrel

Add Comment | Related Links | TrackBack
Related Content

Tips on Changing the Inner Barrel

I have been changing the inner barrel of my gun out a lot recently to run some velocity, accuracy, and precision tests. I've learned a few tips and tricks that I wanted to share.

- When removing the inner barrel from the hop-up unit, turn the hop-up unit upside down. That would prevent the hop-up spacer from falling out. Then you'll want to put the inner barrel back in with the unit upside down as well.

- If you have a hop-up with very tight adjustment gears, you can leave the hop-up setting as they are while removing and inserting inner barrels. You can preserve the hop-up setting between inner barrels in this manner. That's assuming you haven't turned the hop-up all the way up, which may possibly prevent the inner barrel removal.

Do you have tips and tricks of your own? Feel free to share them in this thread.

Jake
Wed, 13 Nov 2013 02:54:09 +0300

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

Title: Change Airsoft BB Velocity with Spring or Inner Barrel?
Weblog: GearHack
Excerpt: Whenever someone talks about changing the velocity of their airsoft electric gun (AEG), they are generally talking about changing the FPS by using a different spring. If they want to increase the FPS, they are talking about using a stronger spring. If they want to decrease the FPS, they are talking . . .
Tracked: Wed, 13 Nov 2013 02:55:38 +0300

Add Comment

Spam Control | * indicates required field

Your Name: *
E-mail:
	Remember Me!
Comment: *
	File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File: (20 MB Max)
Spam Protection: *	Answer of 10 + 10?
	Click button only once, please!