How to Install a Mock Silencer on the H&K UMP?

Add Comment | Related Links | TrackBack
Related Content

How to Install a Mock Silencer on the H&K UMP?

The H&K UMP has a positive 13mm internal thread. You will reveal this thread when you remove the orange tip with a heat gun and a pair of pliers. You can get a 13mm positive to 14mm negative adapter to put a standard airsoft thread on the H&K UMP. As the video below points out, the 13mm positive to 14mm negative creates a minor problem of tightening the mock suppressor loosens the adapter. My advice tip... find a 13mm positive to 14mm positive adapter and use positively threaded muzzle devices.

Jake
Tue, 16 Dec 2014 00:39:36 +0300

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Your Name: *
E-mail:
	Remember Me!
Comment: *
	File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File: (20 MB Max)
Spam Protection: *	Answer of 10 + 10?
	Click button only once, please!